Hall Technologies November 8, 2022
Page 19 of 30
WI-FI SETTINGS
UI Element
Description
Mode
•
5G: Configure the device’s frequency band as 5GHz.
•
2.4G: Configure the device’s frequency band as 2.4GHz.
By default, the device works at 5GHz. If your wireless devices don’t support 5GHz,
configures the frequency band as 2.4G before connecting them to the device via
Miracast.
Channel
By default the Channel is set to Auto. If a different wireless channel is desired,
uncheck Auto and select the desired channel.
Apply
Click to apply setting changes.
SOFT AP
UI Element
Description
Setting
•
On: Enable the device’s soft AP (Access Point) function.
•
Off: Disable the device’s soft AP function.
Soft AP Router
•
On: Enable the device’s soft AP router function so that wireless devices
connected to soft AP are able to access the internet (in the condition that the
LAN port of the device is connected to the internet).
•
Off: Disable the device’s soft AP function to prevent wireless devices
connected to soft AP from accessing the internet.
Note:
Before you use this feature, ensure the soft AP function is enabled.
Soft AP Password
Configure soft AP password.
Note: The soft AP password must be 8~20 characters in length, including letters,
numbers, “_” or “-”.
