Hall Technologies November 8, 2022
Page 10 of 30
device will switch to the source and display it on the screen.
o
If the last selected wired source is not active, the device will check the other wired
source. If that source is active, the device will switch to the source and display it
on the screen.
o
If there’s no active source, the device will display the Guide Screen on the display,
and after 1 minute, the device will send the CEC power off command to turn off
the sync display.
Note:
If a new source replaces the current wireless source (HT-Voyager / AirPlay / Miracast,
Smart View), the current wireless source is disconnected from the device and the new source is
displayed.
SCREEN MIRRORING
With screen mirroring support, the device allows users to wirelessly share multimedia from their
devices on any HDMI displays. Screen mirroring can be performed over AirPlay, Miracast, Smart
View and HT-Voyager.
1.
Screen mirroring over AirPlay
Using an iPhone 8 (iOS 15.2) for example:
1.
Connect your iPhone to the soft AP of the device.
ð
Soft AP SSID
: this should be the same as the device name which can be obtained
from the OSD at the upper right corner of the display screen. By default, it is set as
HT-ODYSSEY
.
ð
Password
: this password can be set through Web UI or Telnet API and can be obtained
from the OSD at the bottom right corner of the display screen. By default, it is set as
12345678
.
2.
Slide up from the bottom of the iPhone’s screen to show the control center. Click
Screen
Mirroring
and choose the device name in the pop-up list.
