15
UHBX-R-XT
In a daisy chain, only the operation of the first receiver in the chain matters. It
is recommended that if you have any issues, make sure the TV is connected to
the HDMI output port of the receiver, Turn on the TV, then using the GUI
“LEARN” the EDID of the TV and then put the system in Emulate EDID
mode. From then on regardless of TVs being connected and powered, the
source will get proper EDID.
8.2 Configuration page
Use this page to define and upload upto 6 internal commands.
You can also enable the “Auto Power Mode” where the UHBX-R-XT sends
power on and off commands based on detecting video on the HDBaseT signal.