Installing the L-807 Wind Cone
Attaching the Basket to the Pole
After the swing arm has been correctly positioned and the pole has been
attached to the anchor, attach the basket to the pole.
1.
Remove the basket from the shipping pallet.
2.
Rotate the basket so the raincaps are pointed away from the pole, see
Figure 10.
1
3
2
HBA119
4
5
Figure 10. Positioning the Basket
1. Top End of Pole
2. Anti-locking Compound to Threads
3. Rain Caps
4. Basket Support Pipe
5. Correctly Positioned Basket
HBA109
3.
Apply anti-locking compound to the threads of basket support pipe, see
Figure 10.
4.
Screw the basket to the top of the pole.
This is done by placing an 18" pipe wrench or larger around the basket sup-
port pipe. Tighten until secure.
5.
Inspect the entire assembly for nicks or other damage to painted surfaces.
Apply the supplied paint to these areas.
6.
Attach the lights to the basket, see the following procedure “Installing
Lights” on the following page. If the wind cone is unlighted, proceed to
“Installing the Wind Sock to the Basket” on page 29.
24
L-807 and L-806 Wind Cone Installation and Maintenance Manual