Halcro DM8 Owner'S Manual Download Page 25

 

 

  

 Page 25 of 26 

TM

  

dm8 

 

 

Warranty 

 

IMPORTANT - Please read the following details very carefully 

 

HALCRO™ products are warranted to be free of defects if used under normal conditions for a 

period of ninety (90) days from the date of purchase. To extend the warranty period to four (4) 

years for the dm8, please complete and return the warranty registration form. 

 

As mentioned previously, do not attempt to open any of the preamplifier compartments. The 

compartments are sealed at the factory. If any of the seals are broken, the warranty will be void 

and  all  service,  repair  and  freight  costs  will  be  charged  to  the  owner.  Willful  damage, 

tampering and damage caused by moisture are not covered by the warranty. 

 

The warranty will only be recognized by HALCRO™ if a copy of the original receipt from your 

dealer  showing  all  details,  including  the  date  of  purchase,  accompanies  the  completed 

warranty registration form. The warranty period will commence at the date of purchase, not at 

the date the warranty registration form is received by HALCRO™. 

 

Return authorization from HALCRO™ prior to shipment must be obtained for any warranty 

requirements.  To  obtain  this  authorization,  please  ask  your  dealer  or  email  HALCRO™  at 

[email protected]

 . 

 

The original packaging must be used for shipping for warranty or service requirements. If you 

have misplaced or damaged the original packaging, you can purchase new packaging through 

your dealer or  

 

The  warranty  registration  form  is  included  in  this  owner's  manual  on  the  following  page. 

Please  cut  it  out  carefully  along  the  line  up  the  left-hand  side  of  the  page  and  return  it  to 

HALCRO™. You will find the address and facsimile details on the warranty registration form. 

 

PLEASE  COMPLETE  ALL  SECTIONS  OF  THE  FORM,  THEN  FAX  OR  POST  THE 

COMPLETED  WARRANTY  REGISTRATION  FORM  TO  HALCRO™  IMMEDIATELY.  WE 

WILL THEN NOTIFY YOU OF ITS ARRIVAL AND ACCEPTANCE. 

Summary of Contents for DM8



























Reviews: