56
Maintenance and Service
5.9.1 Removing the dirt hopper
1. Switch the machine off and move the
lever (Fig. 24/5) for locking the dirt
hopper to the right (looking in drive
direction) and, at the same time,
pivot the handlebar (Fig. 24/4)
forwards. The frame (Fig. 25/2) of
the dirt hopper is lowered.
The engine must be at a
standstill before the dirt hopper
(Fig. 24/3) is removed. Risk of
injury through swirling waste
and dust!
2. Hold the dirt hopper (Fig. 24/3) by
the handle (Fig. 24/2) and pull it to
the rear and out of the machine
Fig. 25
5.9.2 Emptying the dirt hopper
Check the fill level of the dirt hopper
(Fig. 24/3) regularly and empty it
regularly and as necessary.
Observe the applicable
national laws and local
regulations when disposing of
waste.
5.9.3 Inserting the dirt hopper
1. Insert the dirt hopper (Fig. 24/3)
back in the machine from the rear
until they perceptibly engage in the
frame (Fig. 25/2).
2. Pivot the handlebar (Fig. 24/4)
towards the rear until the lever
(Fig. 24/5) for locking the dirt
hoppers audibly engages.
5.9.4 Changing the seals
Check the dirt hopper seals (Fig. 25/1)
for wear on a weekly basis and change
the seals as necessary.
1. Remove the dirt hopper,
refer to paragraph 5.9.1.
2. Pull the seals (Fig. 25/1) from the
edges.
3. Press new seals (Fig. 25/1) on the
edges.
4. Insert the dirt hopper,
refer to paragraph 5.9.3.
2
1
