29
Operation
4. Lower the side brush: Move the lever
(Fig. 7/1) forwards.
5. Accelerating: pull the drive bar up,
refer to paragraph 3.3.2.
6. Drive to the ground surface to be
cleaned.
Steps and curbs up to a height
of 4 cm can be driven over,
carefully. When driving over
thresholds, release the drive
bar and tip the machine back a
little so that the front roller can
negotiate the step.
7. Operate the shaking device
occasionally, refer to paragraph
”Operating the shaking device”.
8. Check the contents of the dirt hopper
regularly and empty as necessary,
refer to paragraph ”Emptying the dirt
hopper”.
Do not overload the dirt
hopper! This can affect the
stopping distance. Caution,
particularly when sweeping up
dirt such as metallic chippings!
Tip out the dirt hopper from a
low height when emptying to
prevent dust swirling around! If
necessary, pay attention to the
wind direction and evade any
clouds of dust! Health hazard!
3.3.5 Switching off
Turn the key switch to Position 0.
Remove the ignition key when
leaving the machine to prevent
unauthorized use.
