3
fication.
Notes on warranty
The terms of the sales contract apply.
Damages are not subject to warranty if
they are due to non-compliance with the
maintenance and service provisions.
The maintenance work has to be perfor-
med by an authorized Hako service
center and confirmed in the "Mainte-
nance certificate" which is the warranty
document.
The following is excluded from
warranty: fuses, natural wear, damages
caused by overload, inexpert handling
and unauthorized modification of the
machine. Moreover, any claim for war-
ranty cannot be accepted if damages of
the machine are caused by fitting parts
or accessories without Hako's prior and
explicit consent or by non-compliance
with the maintenance instructions.
Acceptance of the machine
Upon arrival, check machine for possi-
ble damages in transit. For refund of
such damage, have the Deutsche Bahn
AG or your freight forwarder confirm
such damage. Mail notification and
waybill to:
Hako GmbH
Hamburger Strasse 209-239
23843 Bad Oldesloe
Regulations for Approval
According to §18 of the German Motor-
Vehicle Construction and Use Regulati-
ons (StVZO), the Hako-Jonas 1200 V/D
is an automotive machine. The manu-
facturer supplies the expertise required
for type approval. On the base of this
expertise, the local approval authority
submits the valid type approval.
Unnecessary is a registration number.
According to §29 of the German Motor
Vehicle Construction and Use Regulati-
ons (StVZO) is a general inspection un-
necessary too, as the type definite
maximum speed is minor 20km/h.
According to the German Motor Vehicle
Construction and Use Regulations
(StVZO), the machine has to be equip-
ped with first aid kit, warning triangle
and the type approval certificate when
being used on public roads, paths and
places.
Any modification carried out at the
Hako-Jonas 1200 V/D and having an in-
fluence on the type approval specificati-
ons and are not indicated there will
render the type approval invalid. Before
receiving a new type approval, the ma-
chine has to be presented to an autho-
rized expert for issue of new expertise.
This expertise turns type approval after
being stamped by approval authority..
Driving Licence
According to the Driving Licence Act,
any person who is driving a vehicle run-
ning at a construction-defined maxi-
mum speed of 6 km/h or more on, public
roads, paths and places has to hold a
valid driving licence. A driving licence of
the class L is required for driving the
Hako-Jonas 1200 V/D (automotive ma-
chine up to a speed of 25km/h).
Introduction
3
fication.
Notes on warranty
The terms of the sales contract apply.
Damages are not subject to warranty if
they are due to non-compliance with the
maintenance and service provisions.
The maintenance work has to be perfor-
med by an authorized Hako service
center and confirmed in the "Mainte-
nance certificate" which is the warranty
document.
The following is excluded from
warranty: fuses, natural wear, damages
caused by overload, inexpert handling
and unauthorized modification of the
machine. Moreover, any claim for war-
ranty cannot be accepted if damages of
the machine are caused by fitting parts
or accessories without Hako's prior and
explicit consent or by non-compliance
with the maintenance instructions.
Acceptance of the machine
Upon arrival, check machine for possi-
ble damages in transit. For refund of
such damage, have the Deutsche Bahn
AG or your freight forwarder confirm
such damage. Mail notification and
waybill to:
Hako-Werke GmbH
Hamburger Strasse 209-239
23843 Bad Oldesloe
Regulations for Approval
According to §18 of the German Motor-
Vehicle Construction and Use Regulati-
ons (StVZO), the Hako-Jonas 1200 V/D
is an automotive machine. The manu-
facturer supplies the expertise required
for type approval. On the base of this
expertise, the local approval authority
submits the valid type approval.
Unnecessary is a registration number.
According to §29 of the German Motor
Vehicle Construction and Use Regulati-
ons (StVZO) is a general inspection un-
necessary too, as the type definite
maximum speed is minor 20km/h.
According to the German Motor Vehicle
Construction and Use Regulations
(StVZO), the machine has to be equip-
ped with first aid kit, warning triangle
and the type approval certificate when
being used on public roads, paths and
places.
Any modification carried out at the
Hako-Jonas 1200 V/D and having an in-
fluence on the type approval specificati-
ons and are not indicated there will
render the type approval invalid. Before
receiving a new type approval, the ma-
chine has to be presented to an autho-
rized expert for issue of new expertise.
This expertise turns type approval after
being stamped by approval authority..
Driving Licence
According to the Driving Licence Act,
any person who is driving a vehicle run-
ning at a construction-defined maxi-
mum speed of 6 km/h or more on, public
roads, paths and places has to hold a
valid driving licence. A driving licence of
the class L is required for driving the
Hako-Jonas 1200 V/D (automotive ma-
chine up to a speed of 25km/h).
Introduction
Summary of Contents for Jonas 1200 V
