9
Safety Information
1.4
Operation/Safety Information
The Cleanserv PB51/2000 may be run
by qualified personnel only; such per-
sonnel will have to have evidenced their
qualification for running the machine to
the owner or his authorised representa-
tive; operators explicitly will have to be
instructed by the owner or his author-
ized representative to use the machine.
Never leave the machine unattended
before the motors are off and the ma-
chine is protected against unintended
movements. To preclude unauthorised
use of the machine, switch the machine
off and pull the key.
Shut down the motors before transport
of the Cleanserv PB51/2000.
During operation the machine, the oper-
ator has to take account of local condi-
tions and when working he has to watch
out for other persons, especially chil-
dren.
Note the following oper-
ating information:
The machine may be used for cleaning
such surfaces approved by the owner
or this authorised representative.
- Do not use the machine on floors
which are not suitable for the ultra-
high speed process (speed of
- 2000rpm max.) such as uneven or
soft flooring. The high speed of the
machine generates a low pressure
at the pad by which the flooring
may loosen and be thrown off.
- Do not use damaged pads. The
Cleanserv PB51/2000 has not been
designed for collection of dusts
which are hazardous to health or
explosive.
- Never collect explosive fluids, un-
diluted acids and solvents. This in-
cludes gasoline, paint thinners or
fuel oil, which - when penetrating
the air being taken in - may form
explosive vapours or mixtures;
moreover acetone, undiluted acids
and solvents if they should be ag-
gressive to material used with the
machine.
- Do not get in the near of rotating
parts during operation of the ma-
chine.
- Objects lying on the floor may be
thrown up into the air in the area of
the high-speed pads. Make sure to
remove such objects before opera-
tion.
