16
First Operation
1.1.2
Charge Batteries
Please observe the fol-
lowing safety provi-
sions:
- Observe the instructions manual
and the safety provisions of the
battery and charger unit manufac-
turer.
- Switch the charger ON only after
battery cable has been connected
to the charger unit.
- Do no close the front hood during
charging procedure
- After charging: First switch charg-
er unit OFF then separate battery
cable and charger unit.
1. Make sure that the machine is
switched off by key switch (Fig. 5/1)
and the key is pulled.
2. Open the font hood (Fig. 4/2)
3. Disconnect battery plug (Fig. 4/3).
4. Connect the battery plug and the
charger unit plug.
5. Connect charger unit to the mains.
6. After charging, first switch off the
charger unit, then separate the bat-
tery cable.
7. Connect battery plug of the Cleans-
erv PB51/2000.
8. Check the charge condition at the
battery indicator, see chapter 3.
Fig. 3
Charge battery
3
2
1
