![background image](http://html1.mh-extra.com/html/hakko-electronics/matala-25l/matala-25l_instruction-manual_3330575016.webp)
-15
MATALA LINEAR AIR PUMP DIAPHRAGM REBUILD INSTRUCTIONS
MATALA 40L, 60L, 80L, 80LH shown
Your new diaphragm kit includes two diaphragms. Each diaphragm consists of two
halves. Also included is a bag with new nuts and washers.
Tools you will need: Flat head screw driver, Phillips head screw driver, Adjustable
wrench.
1) Remove top filter cover and filter pad.
2) Turn pump over and unscrew the 4 screws which connect the body to the base.
3) Use a flat head screw driver to pry outer metal body away from the base.
4) Remove body.
5) Inspect motor for burned wire, torn rubber hoses, fine metal dust. Clean gently with
damp paper towel.
6) Repair only one diaphragm at a time. Remove the black J-tube from diaphragm outlet.
Once removed, just push the top of tube to the side out of the way.
Summary of Contents for Matala 25L
