10
D. Setting method in AUTO mode
CAUTION
Be sure to press the
button and set the mode
to AUTO.
The temperature profiles from 1 to 3 have been
initially set. If it is necessary to change, see
page 13.
1. Opening up a file
CAUTION
Be sure to insert the control card before
opening.
Display a file number using the
or
button.
NOTE:
If the file number is not changed, it is unneces-
sary to insert the control card.
When a desired file number appears, press
the
button. The file number is changed.
2. Pressing the HOT AIR button on the
handpiece causes the unit to begin to
blow, and setting the temperature profile
causes it to start the file program.
NOTE:
When FR-820 has been connected to FR-
803B with the junction cord, pressing the HOT
AIR button also starts FR-820 blowing air.
In such a case, the cool down timing is also
synchronized in both the products.
3. When all the steps are completed, the unit
will be automatically stopped.
Press the
or
button.
Step 1
Temperature display
Temperature display
Temperature display
Timer
Timer
Timer
Step 2
Step 3
Cool down
Temperature
is increasing.
Temperature
is increasing.
Temperature
is increasing.
Temperature
is decreasing.
Timer is in
operation.
Timer is in
operation.
Timer is in
operation.
Press the
button.
