3. WARNINGS, CAUTIONS, NOTES AND EXAMPLES
Warnings, cautions and notes are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows:
WARNING:
Failure to comply with a
W
ARNING may result in serious injury or
death.
CAUTION:
Failure to comply with a CAUTION may result in injury to the
operator , or damage to the items involved.
Two examples are given
below .
NOTE:
A NOTE indicates a procedure or point that is important to the process being
described.
EXAMPLE:
An EXAMPLE is given to demonstrate a particular procedure, point or
process.
2
CAUTION
When power is ON, tip temperatures will be between 200 and 45
0
°
C. (392 to 840
°
F.)
To avoid injury or damage to personnel and items in the work area, observe the
following:
●
Do not touch the tip or the metal parts near the tip.
●
Do not allow the tip to come close to, or touch, flammable materials.
●
Inform others in the area that the unit is hot and should not be touched.
●
Turn the power o
f
f when not in use, or left unattended.
●
Turn the power o
f
f when changing parts or storing the Hakko 942.
CAUTION
To prevent accidents or damage to the Hakko 942, be sure to observe the following:
●
Do not use the Hakko 942 for applications other than soldering.
●
Do not allow the Hakko 942 to become wet, or use it when hands are wet.
●
Do not modify the Hakko 942.
●
Use only genuine Hakko replacement parts.
●
Do not bend or damage the control card. If the card does become damaged, do not force the
card into the station slot.
●
Do not strike the iron against hard objects to remove excess solde
r.
This will damage the
iron.
●
Remove power and iron cords by holding the plug – not the wires.
●
Be sure the work area is well ventilated. Soldering produces smoke.
●
The Hakko 942 is not intended for use by children or infirm persons without supervision.
●
Children should be supervised to ensure that they do not play with the Hakko 942.
