4 / 14
Hakki Feed 472
Translation
Version 1
The operator must ensure that the use of the device does not cause danger to others and that there
are no unauthorised persons in the danger zone.
The machine may not be operated while under the influence of alcohol or other drugs, or when tired.
The machine may not be operated unless the operator has familiarised themselves with this
instruction manual.
The machine is only intended for transferring logs to the Hakki Pilke firewood processor.
The operator is not permitted to modify the structure or operation of the machine or remove
protective equipment.
The operator must wear ear protectors, sufficiently tight-fitting work clothing and gloves, protective
goggles and safety footwear.
Before starting up the machine, the operator must ensure that the machine and its guards are intact.
When cleaning the machine or carrying out any maintenance, it must be disconnected from its power
source.
2.
Receipt and assembly
2.1.
Delivery inspection
Please dispose of the log table’s packaging materials in an environmentally friendly manner.
Check that the machine has not sustained any damage during transit, and ensure that all necessary parts are
included in the package. In the event of any defects or damage, contact the retailer immediately.
2.2.
Assembly instructions
The table can be delivered either assembled or packaged. If the table is delivered in packaged form, it must be
assembled before commissioning in accordance with separate assembly instructions provided with the
package.
2.3.
Lifting and moving the machine
When moving the machine, make
sure that the moving and lifting
capacity of your tractor or forklift is
sufficient for the weight of the
machine. Ensure the sufficient length
of the lifting prongs so that the tips
rest safely under both frame plates
(Figure 1). Only lift the table when it is
empty and use the lifting points
shown in
Figure 1
.
Figure 1. Lifting points of the machine
Note! Incorrect lifting may cause a hazardous situation or damage the machine.
