_________________________________ ___EN__________________________________26
Press the ‘
DISINFECT
’ button, and the ‘
’ icon will flash.
Press the ‘
ENTER
’ button to confirm the manual start of the Anti-legionella
function. Then the heat pump heats the water in the tank up to 65
°C
, thereby
destroying any Legionella bacteria infection possibly present in the tank.
While the temperature of the hot water in the tank exceeds 65°C, the ‘
’ icon
flashes.
Anti-legionella function timer
Press and hold down the ‘
DISINFECT
’ button for 3 seconds to navigate to the
timer function and display the clock setting option. While the function is being
set up, the ‘
’ icon continuously flashes and the display shows the
‘
’ function, as well as a slowly flashing time setting display.
By pressing the
‘DOWN’
or ‘
UP’
arrow set the time when you want to activate
the function.
To confirm the clock setting, press the ‘
CLOCK
’ button. Then the minute
setting will flash similarly to the hour setting before.
Set the minutes on the clock by pressing the
‘DOWN’
or
‘UP’
arrow.
Confirm the setting by pressing the ‘
ENTER
’ button. Thereby, you can activate
the function and quit the setting menu.
Remark:
The appliance will enable the anti-legionella function automatically at the time
set on every 7th day.
If you fail to set a time for this function, the automatic Anti-legionella protection
will turn on by itself at 23.00 every 7th day.
If the appliance is turned off or the program "Anti-leginella" is being run, pressing
the ‘
DISINFECT
’ button will make the ‘
’ icon show up.
VACATION mode
