1 1
MAINTENANCE INSTRUCTIONS
Always unplug the HairMax from the power electrical outlet before
cleaning.
DO NOT use acetone or any other solvents on any part of the HairMax.
Use of acetone or other solvents to clean the window can
immediately block most of the laser light from coming through.
To clean the LASER WINDOW
(from where the laser light shines
through), unplug the device, turn power off and gently clean
with a soft, slightly moistened cloth. Do not use any soaps or
detergents – just warm water.
Cleaning comb TEETH
To keep the TEETH of the combs clean, gently remove any hairs
or dust with a slightly moistened towel.
For a more thorough cleaning, gently pull out comb TEETH from the
center. TEETH can be washed using soap and water. Dry
combs thoroughly and replace them by inserting the top of the
TEETH first. Then, press the bottom of the TEETH with your thumb until
they click into place. To order replacement combs, please order online
at www.hairmax.com or contact Lexington International at
561.417.0200.
If the POWER CORD becomes twisted, unplug and straighten it prior to
use. Do not put strain on POWER CORD if you need to untangle or
straighten it.
Only use directions, cleaning methods and operating procedures
as specified in this manual.
Summary of Contents for LaserComb Advanced 7
Page 1: ...USER MANUAL...
