9
INSTRUCTIONS FOR USE
HairMax Advanced 7 can function by either using the batteries
or directly from the optional power cord. (please refer to
REPLACING THE BATTERIES on page 7.)
GETTING STARTED
1. Read and follow all directions prior to use.
2. If you’re using POWER CORD (optional-not included), place one end
directly into the handle end of the HairMax and the other end into
an indoor electrical outlet (Illustr. 1).
3. Slide
the
POWER/LASER BUTTON
to
the
middle
or
top
position.(Illustr. 2). (Middle position activates the laser and vibrate
feature. Top position is laser only). You can clearly see the laser light
when the HairMax is operating. (Avoid Direct Eye Exposure when
the laser is illuminated.) The HairMax is now ready for use.
Note:
The HairMax will automatically vibrate every four (4)
seconds. This is an indication for the user to move the HairMax to
the next portion of the scalp. For turning off vibration function
please refer to page 10.
4. Place the HairMax flat on your scalp making sure that both rows of
teeth are touching the scalp (Illustr. 3).
5. Start at your hairline. Move the HairMax slowly (in combing motion)
by placing the device on a spot and leaving it there for 4 seconds.
Once you feel the vibration move the HairMax about 1/2 inch (1
cm) to the next spot without lifting the device off your head. You
will make a few complete passes over your scalp. For the first pass,
move the HairMax against the direction of the hair growth - front to
back (Illustr. 4) and side to side on the second pass (Illustr. 5). Repeat
these passes within the recommended 15 minutes.
Advanced 6
1
2
3
Summary of Contents for LaserComb Advanced 7
Page 1: ...USER MANUAL...