MANOK plus
Layout and function
28
Order h49 7144.907-333
4.3.3 MANDO Adapt
Through adaptation of the MANDO Adapt, internal clamp-
ing of the workpiece can be achieved.
4.3.4 Morse taper adaptation
Through Morse taper adaptation, adaptation options are
rendered possible with a Morse taper connection.
4.3.5 Face driver adaptation
Adaptation of the face driver makes it possible to machine
the entire length of the workpiece.
4.3.6 vario part end-stop system
The vario part end-stop system operates on the same prin-
ciple as an end-block box and its height can be adjusted in
1 mm increments with precision discs.
