MANDO G211
Removal
74
Order h49 7144.907-333
10.5.2 Removal of the functional unit
1. Attach any lifting gear that may be required.
2. If necessary, fit the mounting aid onto a vertically sus-
pended spindle.
3. Move the machine drawtube to its rear limit stop.
4. Unfasten and remove the fixing screws on the functional
unit.
5. Using the least possible force and speed, move the
drawtube on the machine to its front limit stop [see »Pre-
paring the machine for removal« chapter].
INFORMATION
If lifting gear needs to be used, rotate the spindle
flange and machine spindle manually to tighten / un-
tighten the functional unit.
6. If necessary, unscrew and remove the functional unit
from the machine drawtube.