MANDO G211
Layout and function
26
Order h49 7144.907-333
4.2 Accessories required
4.2.1 Spindle flange
The spindle flange helps to adapt the clamping device to suit
the machine tool.
Depending on the scope of delivery, the spindle flange can
either be supplied with the unit or provided by the customer.
4.2.2 Drawtube adapter
The drawtube adapter serves as a connector between the
drawtube on the machine tool and the clamping device and,
depending on the type of machine, can be configured in var-
ious forms.
4.2.3 Segmented clamping bushing
The segmented clamping bushing is manufactured with a
customer-specified clamping diameter.
4.2.4 Workpiece end-stop
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
4.3 Optional accessories
The following optional accessories are available for different
sizes of product.
4.3.1 hs dock actuating unit
The actuating unit is used for pneumatic and hydraulic ac-
tuation of the MANDO segmented mandrels.
4.3.2 Rotating ms dock actuating unit
The actuating unit is used for manual actuation of the
MANDO segmented mandrels.
