Haiku K3150-X0, Installation Manual

Page: 10 / 24

©2012 DELTA T CORP. ALL RIGHTS RESERVED. 6
INSTALLATION (CONT.)
Step 3. Installing the extension tube
With the fan placed carefully in the upright position, loosely
secure the motor brackets to the motor with M6 x 28 mm
bolt (A). Install the extension tube with the M6 x 32 mm bolt
(B). Securely tighten both bolts.
Note: Wiring is not shown in the illustration
Extension
Tube
Step 4. Connecting the safety cable and ground wire
Install the safety cable and ground wire lugs to the motor
brackets with the (2) unpainted M4 x 6mm screws and
lock washers. Plug the wiring harness from the extension
tube into the wiring harness from the fan.
Secure the wiring and safety cable to the motor brackets
with the provided zip tie. Make sure the wires are tightly
secured against the motor brackets so that the wiring
cover seats properly.
Safety
Cable
Ground
Wire
Step 5. Preparing the wiring cover and canopy
Slide the wiring cover over the extension, resting it on the fan hub. Make sure there are no wires
visible between the cover and the fan hub. Slide the canopy over the extension tube, temporarily
resting it on the wiring cover.
Canopy
Wiring
Cover
Cable
Tie
A
B