7 Display Screen
Washing time (The
time does not
include water-feed
time and heating
time.
A
fter the
“
Wash
”
program
ends, this area will
go out.)
Times of
rinsing
(
A
fter the
“
Rinse
”
program
ends, this
area will go
out.)
Spinning time
(
A
fter the
“
Spin
”
program ends,
this area will go
out.)
Spinning time
means the time
for spinning at
high speed.
“
Dry
”
program (It is
available in the
“
Wash & Dry
”
and
“
Dry
”
modes.)
Press the
“
Dry
”
button, the program
will switch among
the options listed on
the right
:
N
ormal
Low Temp
Ironing
1
5
0min
120min
9
0min
6
0min
3
0min
Heating temperature
(
M
a
x
imum allowable
heating temperature
varies with programs.
When no temperature
value displays, it
indicates that the
washer-dryer will not
heat.)
Spinning speed
(The setting value of
spinning speed
displays.
M
a
x
imum
allowable spinning
speed varies with
program.)
A
fter starting the washer-dryer, to prevent
washing process from e
x
ternal interference,
activater the child lock function by
simultaneously pressing and holding the
“
Temp.
”
and
“
Speed
”
button for more than
3
s; to
deactivate the child lock function, simultaneously
press and hold the same two button for more
than
3
s again.
A
fter the child lock is activated, all the function
buttons (escept the
“O
ff
”
button) are out of
function.
A
fter the program running ends and the
washer-dryer antomatically shuts down, the child
lock function will automatically cancel. If power
failure occure in the process of program running,
the child lock function will not automatically
cancel and must be manually cancelled after
turning on the washer-dryer again.
Washing program (The washer-dryer described in
this manual is set with 12 washing programs. Three
modes i.e.
“
Wash
”
,
“
Wash&Dry
”
and
“
Dry
”
are
corresponding to defferent washing programs.
In the
“
Wash
”
mode,
C
otton,
M
emory, Synthetics,
Wool, Silk, Heavy, Quick,
N
ight Wash, High Temp
and Tub
C
lean program are effective.
In the
“
Wash & Dry
”
mode,
C
otton,
M
emory,
Synthetics, Heavy, Quick,
N
ight Wash, High Temp
and Tub
C
lean program are effective.
In the
“
Dry
”
mode,
C
otton,
M
emory, Synthetics,
N
ight
Wash, Heavy,
A
ir Wash and Supporter Dry programs
are effective.)
High
Temp
C
aution
Prompt information
(Including
:
alarm messages
related to Drain
F
ilter, Dry
F
ilter,Imbalance, High Temp
C
aution and
O
verload.)
It illuminatcs when the
“
Delay
”
function is selected.
A
fter selecting the
“
Delay
”
function and start the program, the program will analyze
according to the parameter settings and detected clothes weight and may start
running ahead of time. It is normal (for e
x
ample, if the delay time is set as
“
”
,
press the
“
Start
/
Pause
”
button to start the program, the program will analyze
according to parameters settings and detected clothes weight and may immediately
start running from
“
”
).
It illuminates
when the
washer-dryer
starts without
selecting the
“
delay
”
function.
Program progress indication area (including four
parts
:
“
Wash
”
,
“
Rinse
”
,
“
Spin
”
and
“
Dry
”
. When a
program running ends, corresponding word such
as
“
Wash
”
in this zone will go out.
F
ull triangles
indecate the program is running.)
N
umerical display area (The program with
automatic weighing function)
:“
”
diaplays
when the program is not running and in the
process of weighing;remaining time or deplay
time (e.g.
“
”
) diaplays when the program is
running. The program without automatic
weighing fuction
:
only remaining time or delay
time diaplays. In abnormal conditions, various
alarm codes (e.g.
“
”
) diaplay.
M
ark of locking door
(
A
fter door locks up, the diagram marks
bright.
Under the safe status and the procedure
being circulated, the mark of locking
door will be put out after pressing
"Start
/
Pause" , then the door can be
openning pressing the "
O
pen" button.)
N
ote
:
The time displayed on the display screen is only for reference and may be slightly different from the
actual time.
Synthetics
Ironing
Heavy
11
12
