Ⅲ
Mobile phone introduction
1.
Use for the first time
To use your mobile phone, you must insert a valid SIM card in your phone, and the SIM card
supplied by your GSM provider or retailer. The SIM card contains your personal subscriber
information, your phone number, and memory in which you can store phone numbers and
messages.
1.1
Installing SIM card
1. Turn the phone face down and hold supinely its hull. Press the battery clip and slide the
battery cover downwards and then unpack the battery cover.
2. Remove the SIM card from its holder and place it on its slot, then push the plastic clip
holder, until it stops and maintains the SIM. Note: The clipped corner of the SIM card at top
left corner must in align with the one corner of the slot.
3. Slide the battery downwards so that it clicks into place, be careful that the metallic Contacts
of battery on the bottom end in alignment with the four metal strips on the phone.
4. Slide the battery door into slots, until it locks into place.
1.2
Switch on the phone
1. To switch on the phone, press the red power key.
2. When you switch on the phone you may be prompted to enter the PIN code, which is the 4
to 8-digit secret code of your SIM card to protect it from unauthorized use. It is
pre-configured and communicated to you by your operator or retailer.
If you want to change the PIN code, see lower chapter “PIN codes safeguard”.
Note:
If you enter a wrong PIN code 3 times, your SIM card is blocked. To unblock it, you must
request the PUK code from your operator.
1.3 Set Time and Date
As prompted by the phone at first switch on, set the date by pressing the appropriate numeric
keys then press
[OK]
, to validate, if you need to erase a number, press
CLR
key to cancel it.
Proceed in the same way to set the time. For complete date and time options, see lower chapter
‘Time and Date’.
1.4 Copy of the SIM Contacts
If you had a mobile phone before and are using the same SIM card, the card might contain all
or part of your current Contacts. The mobile phone detects this and a message asks you if you
want to copy your SIM Contacts onto the built-in Contacts (see below). Press ‘
CLR
’ key to cancel
or
[OK]
key to accept. The Contacts located on your phone is automatically set as your default
Contacts. To switch back to the SIM Contacts, please see lower chapter ‘Contacts selecting’.
If you do not copy the SIM Contacts at very first switch, you will be able to do it directly
from the Contacts menu, see lower chapter ‘all copy to phone’.
