6.2.2 Day view/Week view/Month view
The Day view
﹑
Week view and Month view display in the respective format all events stored in
your organizer. Select the view of your views and press
OK
key, once you entered the selected
view, move left or right key to display the previous or next day, week or month.
You can’t only review the old events, but also can create a new one.
6.2.3 Deleting past events
You can also delete past events by selecting Delete past at the first lever of the organizer menu. In
this case, enter the starting date (past or future) from which all previous events will be deleted and
press OK key to delete all events preceding this date.
6.3 Calculator
You may use the calculator to add, subtract, divide and multiply.
+: Press right Key or * Key
-: Press left Key or * Key twice
*: Press up Key or * Key three times
/: Press down Key or * Key four times
Press OK Key or # key to get the result.
Use the keypad to input numbers, the result of floating point number operation will be rounded to
0.01. Press
0
Key to input floating point number.
6.4 Stopwatch
Press OK Key to start timekeeping. Press once more to pause timekeeping.
Press CLR Key to stop timekeeping and resume the digit.
Press up Key or down Key to show the last time timekeeping.
6.5 Auto switch on/off
Allows you to set the auto switch on or off. When On, you should enter the power on or off time,
then select repeat event.
1.
Enter Auto switch on/off menu, you should choose On or Off separately.
2.
Press Up/Down key to activate it.
3.
Enter the editor and input the power on or off time and press OK Key to confirm.
4.
Select repeat event: Once
、
Every day or On weekdays. Press OK Key to confirm.
Note: if you activate auto switch on and PIN code at the same time, you should input PIN code
first. If the phone has already been turned on, it is impossible to activate auto switch on. Only in
idle mode, can auto switch off can put into use.
6.6 Infrared
IrDA allows you to transfer data to other devices which have IrDA (mobile
、PC、PDA or printer)
by wireless connection.
Note: Forbid to transfer the documents protected by a copyright. First you should activate Infrared
menu.
6.6.1 Receive
when you want to receive data, you should select Infrared
〉
Receive. Then your mobile phone is
waiting for the other end device to send data. During receiving process, the message will be
displayed on the screen and allow you to take out procedures.
In the following cases, your mobile phone will stop receiving data:
Your phone can not find other device in the other end.
Infrared connection is broken.