Haier L26A6A-A1, Operating Instructions Manual, Page: 6 / 13

SOUND BOX INSTALLATION INSTRUCTIONS
9
1. Place the LCD TV with installed
base well, take out the sound box
from packing box, take out two
connecting blocks of sound box,
eight screws and two connecting
wires of sound box from accessory
bag, as figure (1).
2. Refer to figure (2) display (LCD
back view figure), fix the two
connecting blocks of sound box
on the back cover of LCD TV by
using four screws.
3. Refer to figure (3) display (LCD
back view figure), fix the
connecting blocks of sound box
and back cover of sound box by
using the remaining four screws.
4. Refer to figure (3), clip the two
connecting wires of sound box as
figure display into the up and
down four connecting wire cards
separately, the sound box is
finished installing.
BASIC OPERATION
10
1. If the TV set is in standby status, pressing power
switch on the remote controller or TV set can
cancel the standby status, then enter the power on
status.
2. Pressing power switch on the remote controller or
the TV set again, the TV set will enter standby
status.
Standby set: first connect the power supply wire,
then turn the power switch on the back of TV set on.
TV PROGRAM SELECTION AND VOLUME
ADJUSTMENT
You can use CH+/- button or direct-digit choosing
button to select the TV channel number.
Press VOL+/- button to adjust the volume.
RECALL
Pressing RECALL button can switch the channel to the
last channel you watched.
MUTE FUNCTION
1. Press MUTE button to shut off the TV sound, the
screen displays mute mark.
2. Press MUTE button again or VOL+ button to turn
on the TV sound.
OSD LANGUAGE SELECTION
Select the LANGUAGE item in the menu
1. Press MENU button to select OSD setting menu.
2. Press CH+/- button to select LANGUAGE item.
3. Press VOL+/- button to select the language you need.
OSD
MOVE SELECT MENU EXIT
MUTE TV/AV SOUND POWER
MAIN/SUB PIP AAA DISPLAY
POWER ON/OFF TV
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
Connecting block
of sound box
Sound box
Figure (1)
Two screws
Two screws
Figure (2)
Two screws
Two screws
Connecting wires
of sound box
Figure (3)