26
•Before serving a refrigerator, please make sure the power is disconnected to prevent
electrical shock or personal injury.
•Avoid inhaling any particles around the refrigerator when you perform maintenance
work as it can be harmful to your health.
•Clean the refrigerator once a month if possible.
•Wipe the unit interior and exterior with light detergent water if necessary. Then wipe it again with a
dry cloth.
•Do not pour water directly on the shell of the refrigerator or into the chamber as it can damage the
insulation of the electrical equipment and may lead to problems.
•Do not attempt to lubricate the compressor as it is a hermetically sealed compressor.
LED light bulbs are standard in the refrigerator. They consume little energy and are reliable. Should
there be a need for replacement LED lights, please contact the after-sales service personnel.
Cleaning and Maintenance
Warning
Clean the refrigerator
Replace the illumination light
Condensate evaporator is located in the back of the
refrigerator.
•Remove the 2 screws at the bottom and loosen
the other 2 at the top (no need to remove). Lift the
evaporation box upward and take it off ;
•Clean the water container;
•Reverse the procedure and install the water container
back in place. At normal conditions, clean the box once
a month is sufficient. However, at high ambient and
humidity conditions, clean the box 3 times a month.
Clean the evaporation box (HXC-1308/1308B)
Screws at the top
Water container
Screws at the bottom
•Turn off the power switch and the battery charge switch.
•Remove the shelves.
•Clean the interior thoroughly.
•Clean the shelves.
•Place the shelves back in the refrigerator after unit and the shelves are dry.
•Close the door and place a plastic bag over the unit for storage.
Decommissioning of the refrigerator
15
•HXC-158/158B/358/358B/608/608B
•HXC-1308/1308B
Control panel
•HXC-106
Summary of Contents for HXC-106
Page 1: ......
