background image

12

Put in the laundries

The capacity of washing and spinning of the machine refer to the largest weight 

of the standard laundries under dry condition that can be washed or spinned in 
one time. One time washing quantity shall be lower than the rated capacity.
The thickness, size, type of the cloth will inuence the actual washing capacity. 

It is suitable for one time washing to put in reasonable amount of laundries and 
the laundries can be turned round in washing.
Do not select “70L” (for HWM75-1128NZP) or “51L” (for HWM65-1128NZP) water 
level for laundries less than 1.0kg, so as to avoid splashing of water.  

Usage of the detergent

How to use the washing powder

Control panel seat

Liquid whitener inlet

It is suggested to add washing powder into the 

box directly under fuzzy program and reserve 
program.
Dissolve directly inside the washing machine: 

(not applicable for fuzzy and reserve program)
1.   

Add some water(select “20L” water level for 
HWM75-1128NZP and “18L” water level for 
HWM65-1128NZP).

2. Add washing powder. Run for about 30s 

to fully dissolve the power. Then push 
the”Start/Pause” button.

3. Put in laundries. Select suitable water level. 

Push the “Start/Pause”button again.

Quick dissolving of washing powder:

1. Prepare warm water of 30°C and container.
2. Add washing powder while stirring to 

dissolve it completely.

Please add suitable washing powder as per 

the laundries quantity, the set water level and 
water quantity.
If you select “Quick Wash” program, it is 

suggested to use liquid detergent instead of 
washing powder to guarantee the washing effect.
It is not recommended to use rich-foam 

washing powder.
Washing powder with poor quality or long-

time storage may get caked. Please clean the 
detergent box in time.

How to use the whitener

Add water to decided level. Dilute the whitener 

with container, and then pour it into the liquid 
whitener inlet slowly.
Laundries with color or pattern is not 

colorfast, thus not applicable.
The whitener shall not touch laundries directly.

See to the manual of whitener for the usage 

and dosage.
For whitener in powder, dissolve it before using.

Access for detergent and 
washing powder

Detergent box

Summary of Contents for HWM65-1128NZP





















Reviews: