background image

11

Preparation before washing

Preparation before washing

Connect the water inlet hose.

1.

Confirm that the washing machine is earthed reliably. Then 

2.

insert the power plug into the receptacle. Do not connect the 
earth terminal to the gas pipe and tap water pipe.

Put down the drain hose.

3.

Slanting or uneven ground may result in unstable 

4.

working or abnormal noise. Please make the 
machine stand horizontally.

 Pay attention to followings before washing the laundries

Confirm if there’s special requirment for the laundries.

Clear the pocket.
Take out the coins, sand, hairpins etc.

Fasten the buttons and zippers.

The quantity of the laundries shall not exceed the rated value.
The big laundries like the jeans shall be put in loosely.

When the pulsator is running, the buttons of the laundries may cause noise. 
For the sake of discretion, please put the laundries with buttons into 
other laundries.

Please check if the laundries are applicable for washing.

a.

Separate those not colorfast from other laundries.

b.

For laundries not water absorbing, please put them into water with hands.

c.

For laundries with much soil, please remove the soil first. You can add detergent on 

d.

the part with serious soil directly. It is much easier to remove the soil by that mean.
For laundries likely to get lint ball or with long fiber, please first turn the inside out 

e.

before putting them into the water.
Do not put the laundries polluted with chemicals directly into the washing machine.

f.

For those small laundries, laundries likely to be twisted or worn, and woolen 

g.

laundries, please put them into mesh bag before washing.

Summary of Contents for HWM65-1128NZP





















Reviews: