Off
Description of the function of buttons
Mode and meaning of the indicators
On: indicate the program about to run,or indicate the selected mode or
POWER ON/OFF button
Use the operation buttons
Page 12
Remain time digitron
It displays "--" during detecting.
It displays total remained time during the running program(min).
Flashing: indicate the running program, or indicate the selected mode or indicate the water level
Program
SOAK
Standard washing
Washing the woollen textiles
Applicable situation
Posthaste wash of the laundry
with light soil
WASH
Washing the relatively big thick or very
dirty laundries
The purpose is drying the inner tub
and the outer tub,which can avoid
growing mildew.
STANDARD
SOFT
QUICK
WASH
RINSE
SPIN
When the indicator light of WASH,
RINSE,SPIN is on,the program is set.
Fast washing for light soil laundries
(quicker than STANDARD program)
“WATER LEVEL” button
The washing machine can detect the laundries automatically during the
STANDARD program. After detection, it will set the water level to suitable
value among 29L ,37L,46L automatically.
You can also set water level by yourself. After the machine is started, it will
not set water level automatically. You shall push the START/PAUSE button
to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and
will display water level 29L .If wet laundries are put in, it may display water
level 46L. You must set suitable water level by yourself.
If TUB DRY program is selected, the water level will not respond.
During operation of wash and rinse program, you can push down the water
level button to add water. When you release the button, or it reaches the
overflow water level, the machine will stop adding water.
The water level decided may be different from actual value because of the
different moisture level of the laundries.
The water level of rinsing will be higher than the water level of wash during
the STANDARD ,SOAK,SOFT and WASH RINSE SPIN program.(except
the highest water level or choosing the water level of rinsing by yourself)
The digitron displays the time remained (in minute)
before the washing is finished.
Push down the reserve button. The reserve indicator
light is on ,the digitron displays the reserve time of
finishing washing (in hour).The point light flashs to
indicate in reservation
Push the “DELAY”button to display the reserve mode.
Remove the left detergent from the
clothes and then rinse the clothes.
RINSE
SPIN
TUB DRY
Just run the washing cycle without
drainage cycle. The detergent was left
in the tub and can be recycled.
When the clothes are washed or
the clothes are quite wet,extra spin
is needed.
Release the child lock function :push down
“Program ” button for more than 5 seconds ,
After a beep sound,the child lock
function is released.
Child lock function
Push down the button for 5 seconds ,the digitron displays “CL”.Then you can continue setting desired washing procedures.After
setting ,push the “Start/pause” button, The child lock function is activated.All of the buttons are locked and can’t make selection
indicate the water level
“PROGRAM” button
After the power is switched on,
press it to start the machine .
During working push it to pause
During pause,push it to restart.
“Delay” button
“START/PAUSE” button
Push the power button to switch on the power
When the power is on push it again to switch off the
power .
Push the power button to switch on the power ,if the
start /pause button is not pushed the washing machine
will automatically switch off the power after 5 minutes.
When using the child lock function,if the top cover is opened,the machine will stop and display E2 alarm .After 15 minutes the
machine will automatic drainage .If you want to clear the E2 alarm ,please close the top cover and press the “Start/pause ”
button .The E2 alarm will be cleared.
It displays I remained reserved time during reserved
program(hours) .
It displays abnormal symbol in abnormal
situation.(See to Page12)
WATER LEVEL
DELAY
PROGRAM
START/PAUSE
POWER
Remain(Minutes)
Reserve(Hours)
Tub dry
Spin
Rinse
Wash
Standard
Soak
Soft
Quick
Solid
Flashing
18L
12L
29L
24L
37L
33L
46L
41L
