background image

WATER LEVEL

3 Push the " WATER LEVEL "button,select suitable water level

5. Push the "START/PAUSE" button 

START/PAUSE

Finish washing 

Water pressure and water level influence the wash time. 

If the "SOAK " program is selected,the machine will soak before washing,

rinsing,spinning(low water level soak for 10mins,mid level 20mins high 

level 30mins) 

When the "DELAY" function is activated, the indicator light of the program you have set 
will be off. The "reserve (hour)" and "time remain" indicator lights will be on. During 
reserve procedure, push the "DELAY" button to display the reserve mode.
To change the running program or cancel the reserve setting, you 
need to switch off the power and make new selection.

Confirm the operation of reserve program

Page8

Push the "DELAY" button to select suitable reserve wash 

program

4

the washing will finish 

about 18 hours later

Close the top lid

If the top cover is opened , the washing machine will stop running and tweet during spinning. 

After finishing washing,the machine will turn off the power automaticlly.

DELAY

After switching on the power, when select the standard program,the washing machine will 

execute fuzzy program automatically to detect the cloth .After detection, it can set the water 

level automatically. To select other water level, 

 rst push the “START/PAUSE” button, then 

push the “WATER LEVEL” button to set the water level. 

After switching on the power, the reserve time program is set to off mode automatically. If you

need to set the washing procedure to be 

 nished at delay time, please push the “DELAY” 

button to set the reserve washing program. Refer to delay button in Page 8 for selection.   

Even there's no water in the tub, the

spinning will start after a certain period.

Wash the laundries that are prone to lose

colors separately from other laundries.

When  washing start or opening cover intermitting, the washing machine

will begin to work after a period time, this is normal phenomenon.

Wash and spin after putting the damageable 

clothes into tuck net, to avoid scathe.

Attention

Summary of Contents for HWM55-918P

















Reviews: