8-Troubleshooting
Problem
Cause
Solution
Unsatisfactory
washing result.
Degree of pollution does not agree
with selected programme.
Detergent quantitiy was not suf
-
Maximum load has been exceeded.
Laundry was unevenly distributed
in the drum.
Select another programme
.
Choose the detergent acc.to
the degree of pollution and acc.
Reduce loading.
Loose the laundry.
Washing powder
residues are on the
laundry.
Insoluble particles of detergent can
remain as white spots on the
laundry.
Perform extra rinse.
Try to brush the points from the
dry laundry.
Choose an other detergent.
Laundry has grey
patches.
Caused by fats such as oils, creams
or ointments
Pretreat the laundry with a
special cleaner.
8.4 In case of power outage
The current programme and its setting will be saved.
When power supply is restored, previous operation
will be resumed.
If a power failure cuts an operating wash programme,
door opening is mechanically blocked. To get out any
laundry water level should not be seen in the glassy
porthole of the door. Not till then pull lever (A) beneath
service flap (Fig. 8-1) until door is unlocked by a gentle
click. Afterwards refix all parts.
8-1
ficient.
to manufacturer specifications.
If error codes are still displayed after these measures, switch off the appliance, disconnect
the power supply and contact the customer service.
25