background image

7-Care and cleaning

7.1 Cleaning the detergent drawer

Take  always  care  there  are  no  detergent   residues.

 

Clean the drawer regularly (Fig. 7-1): 

1.  Pull out the drawer until it stops. 

2.  Press the release button and remove the drawer.

3.  Flush the drawer with  water until it is clean and 

insert the drawer back in the appliance.

7.2 Cleaning the machine

 

Unplug  the machine  during  cleaning  and mainte-

nance. 

 

Use a soft cloth  with  soap liquid  to clean the 

machine case (Fig. 7-2) and rubber components. 

 

Do not use organic chemicals or corrosive 

solvents. 

7-2

 

Note: Self  Clean

For regular maintenance we recommend to run programme Self Clean with no

load in order to remove possible corruptive residues from time to time. Add a

special machine cleaner.Each 50 working cycles, the Self Clean LED will blink in

standby statue, after running Self Clean programme, the LED will turn off.

 

 

 

 

To prevent  blockage of water supply by solid substanc-

 

supply.

 

Unscrew the  water inlet  hose at the back (Fig. 

7-3)of the appliance as well as on the tap(Fig.7-4) .

 

 

7.4 Cleaning the drum

 

Remove accidentally  washed metal  parts such as 

pins, coins,  etc. from the drum  (Fig. 7-5) because 

they cause rust stains and damage. 

 

Use a  non-chloride  

cleaner

 

for removing  rust stains.

 Observe the warning hints  of the cleaning agent 

manufacturer. 

 

Do not use any hard objects or steel wool for clean-

ing. 

7-4

7-3

7-5

 

 

 

 

 

7-1

1

2

7.3 Water inlet valve and inlet valve filter

es like lime clean regularly the inlet valve filter.

Unplug the power cord and turn off the water 

Remove the filters and flush them with water and

a brush. 

Insert the filter and install the inlet hose.

19

Summary of Contents for HWD120-B14876

































Reviews: