Haier HWD100-BP14636N, User Manual

Page: 29 / 106

EN
10- Installation
29
10.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re-
moved before installation to prevent damage:
1. Remove the blanking plugs.
2. Remove the back cover.
3. Insert the plastic spacers and the transportation bolts.
4. Tighten the bolts with a spanner.
5. Replace the back cover.
10.5 Aligning the appliance
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
●
1. Loose the locknut (1) by using a wrench.
2.
3. Tighten locknut (1) against the housing.
10.6 Drain Water Connection
●
Fix the water drain hose properly to the piping. The hose has to reach at one point a height
WARNING!
●
Use only the supplied hose set for the connection.
●
Only connect to cold water supply.
●
Before connection, check whether the water is clean and clear.
10-5