Haier HWD100-BP14636N, User Manual, Page: 24 / 106

9- Troubleshooting
EN
24
9.2 Troubleshooting with displ
●
ay code
Problem Cause
●
Solution
 Drainage error, water is not fully drained
within 6 minutes,
Check drain hose installation.

Lock-error. Shut the door properly.
 W
●
ater level not reached after 8 minutes.
Drain hose is self-syphoning..
Make sure that tap is fully opened and water
p
●
ressure is normal.
Check drain hose installation.
 Water protective level-error.. Contact the After sales service
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message

:

The remaining wash cycle time will be 1 hour and 25 minutes.
 
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes.
 Automatic load detection is working.

 Function child lock is activated.
 Door is closed because of high water level, high water temperature or spinning cy-
cle.

The buzzer is deactivated.

The buzzer is activated.
 
Function “Speed up” is activated.
:
Clean pump filter.