Haier HW80-BP16636, User Manual

Page: 22 / 96

9-Troubleshooting
GB
22
9.2 Troubleshooting with display code
Problem Cause Solution

• Drainage error, water is not fully drained
within 6 minutes • Clean pump fi lter.
• Check drain hose installation.

• Lock - error. • Shut the door properly.
 • Water level not reached after 8 minutes.
• Drain hose is self-syphoning..
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.
 • Water protective level - error.. • Contact the After sales service.
Many occuring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages..
▶
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
 :  The remaining wash cycle time will be 1 hour and 25 minutes
 :  The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes
 /  /  1/2/3 additional rinses are choosen (see FUNCTION BUTTONS „Extra rinse“).
 The washing cycle is fi nished. The appliance shuts off automatically.
 Function child lock is activated
 Door is closed because of high water level, high water temperature or spinning cy-
cle.
  The buzzer is deactivated
  The buzzer is activated

u

Function “Sped up” is activated