Haier HW80-BP16636, User Manual

Page: 27 / 96

GB
10-Installation
27
CAUTION!
▶
The drain hose should not be submerged in water and should be securely fixed and
leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less
than 80 cm, the washing machine will continuously drain while being filled (self-si-
phoning).
▶
Drain hose is not to be extended. If necessary contact after sales service.
10.5.3 Drain hose to sink connection
▶
The junction must lie above the siphon
▶
A spigot connection is usually closed by a pad (A).
That must be removed to prevent any disfunc-
tion (Fig. 10-8).
▶
Secure the drain hose with a clamp.
10-8
10.6 Fresh Water Connection
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled
end to the appliance (Fig. 10-9. Tighten the
screw joint by hand.
2. The other end connect to a water tap with a
3/4“ thread (Fig. 10-10).
10-10 10-9
Note: Aqua-stop-system:
The aqua-stop system protects against water damage by automatically cutting the
fresh water supply in case of a leaking hose. This is indicated by a red marker (A). The
hose must be replaced.