52
OPERATION
Important!
Oven is equipped with a programmer
with display controlled by six sensor
fields located symmetrically on both
sides of the display. To activate each
sensor field, touch the glass above
the sensor (indicated by a pictogram).
An acoustic signal will be heard,
which was selected in the menu.
(See section: Electronic programmer
operation and oven control.)
Sensor field surfaces must be kept
clean.
Before using the oven for the first time
Remove packaging, clean the interior of
the oven and the hob.
Take out and wash the oven fittings
with warm water and a little washing–up
liquid.
Switch on the ventillation in the room or
open a window.
Heat the oven (to a temperature of
250°C, for approx. 30 min.), remove any
stains and wash carefully;
Important!
The inside of the oven should only be
washed with warm water and a small
amount of washing–up liquid.
