51
● The oven is manufactured to work with
a one-phase alternating current (230V
1N~50 Hz) and is equipped with a 3
x 1,5 mm
2
connection lead of 1.5 mm
length with a plug including a protection
contact.
● A connection socket for electricity sup
-
ply should be equipped with a protec-
tion pin and may not be located above
the oven. After the oven is positioned,
it is necessary to make the connection
socket accessible to the user.
● Before connecting the oven to the soc
-
ket, check if:
- the fuse and electricity supply are able
to withstand the oven load,
- the electricity supply is equipped with
an efficacious ground system which
meets the requirements of current stan-
dards and provisions,
- the plug is within easy reach.
Electrical connection
Warning!
If the fixed power supply cable is damaged,
it should be replaced at the manufacturer
or at an authorized servicing outlet, or by a
qualified person to avoid danger.
INSTALLATION
