Haier HDBL865ATS, Installation Instructions Manual

Page: 22 / 36

20
a b
4"
(10.2 cm)
6"
(15.2 cm)
a
Copper Supply Line
b
House Wiring
3. Place the water supply line and the house wiring on floor of the opening to avoid
interference with the base of the dishwasher and the components under the
dishwasher.
4. Tape the wire to the floor 6” (15.2 cm) in front of unit. This will keep the wire from
moving when the dishwasher is moved into cabinet opening.
STEP 8 – INSERT DRAIN HOSE THROUGH CABINET
WARNING
Excessive Weight Hazard
Use two or more people to move and install dishwasher.
Failure to do so can result in back or other injury.
1. Using two or more people, stand the dishwasher upright.
2. Grasp the sides of the dishwasher at the edges of the door panel, and place the
dishwasher in front of the opening.
3. Insert the drain hose into the hole in the cabinet wall.
a
b
c
e
d
a
Insulation Blanket
b
Water Line
c
Drain Hose (Maximum
Length 10 ft [3.0 m])
d
House Wiring
e
Power Cord (If Used)