Haier HDBL865ATS, Installation Instructions Manual

Page: 15 / 36

13
STEP 4- REMOVE KICK PLATE
1. Using a screwdriver, remove the screws attaching the kick plate to the cabinet.
2. Lift off the kick plate.
a
a
2 Kick Plate Screws
STEP 5- INSTALL 90° ELBOW
1. Wrap the 90° elbow with thread seal tape, and then install it onto the water valve.
NOTE: To avoid damage to the water valve bracket and/or fitting, do not over
tighten the elbow.
2. Position the end of the elbow to face the bottom right of the dishwasher.