Haier ESA405N, User & Care Manual

Page: 11 / 54

ENGLISH
TO TEST YOUR POWER SUPPLY CORD:
1. g u l P power supply cord into a mating, grounded 3 prong outlet.
(See Fig.5)
2. Press RESET (on some devices, a green light will turn on).
3. r
P ess TEST (listen for click; Reset button will trip, and on some devices
a green light will turn o
ff ).
4. r P ess and release RESET (listen for click; Reset button will latch, and on
some devices, a green light will turn on). The power supply cord is ready
for operation.
NOTE:
• The RESET button must be pushed in completely for proper operation.
(See Fig.6)
• The power supply cord must be replaced if it fails to trip when the test
button is pressed or fails to reset.
• DO NOT turn the air conditioner on or o
ff by unplugging the power
supply cord from the outlet. Always turn the air conditioner on or o ff at
the control panel or by using the remote control.
• A damaged power supply cord must be replaced with a new power
supply cord obtained from the product manufacturer and installed by
a quali
fi ed service professional. It cannot be purchased at a retail store
and must not be repaired by the user.
f I the power supply cord is damaged please call Haier Customer Service:
1-877-337-3639.
• The power supply cord contains no user-serviceable parts.
• Opening the tamper-resistant case voids all manufacturer warranties.
• Electrical shock hazard
•
g u l P into a mating, grounded 3 prong
outlet.
• o D not remove the ground prong from the
power supply cord.
• o D not use a plug adapter, extension cord,
surge protector, or multi-outlet adapter
• r u li a F e to follow these instructions can
result in injury, fi re, or electrical shock.
WARNING
INSTALLATION REQUIREMENTS PAGE 9
ELECTRICAL REQUIREMENTS cont.
Fig. 5
RESET
TEST
Fig. 6