Haier ES100V-F1(EU), Instruction Manual

Page: 10 / 112

10
Use
Note: 1.The BPS is available under the Smart or single/dual container modes;
2. Settings of BPS mode can be reserved against power failure;
3. The BPS cannot be independent of other functions.
Turn Off
1.
2.
3.
4.
Things to note during use
Bacteria protection system
Single/dual tank mode
Press “1.5kW” to light the icon “Half”, then the default maximum heating
temperature of 75
℃
blinks for 2s, the actual water temperature appears; the
water in left tank will be heated by the 1500W electric heater.
Press “3kW” to light the icon “All”, and the water in both tank will be heated
simultaneously by 3000W heater.
Press “BPS” to light the icon “ ”, then the default maximum heating temperature
of 80
℃
blinks for 2s, the actual water temperature appears. After the actual water
temperature reaches 80
℃
, the BPS is completed, and the function is
automatically deactivated, with the “ ” off. The maximum heating temperature
is the heating temperature before the BPS is activated. Press “BPS” to re-activate
the bacteria protection system.
After bath, press to turn off the heater.
Tips: In the dual tank mode, because of the different heating powers in two tanks
or other impacts, it is normal that the right tank is still heated when the display
temperature is 75
℃
.
Do not connect the power before filling the inner chamber with water in order
to prevent damage to the water heater.
Adjust the water temperature to suitable level before use in order to prevent
scalding.
As long as the hot water is adequate, set a lower temperature to reduce heat
loss, high temperature corrosion and scaling, thus extending the water
heater is lifespan.
Do not place inflammable substances such as petrol near the water heater,
otherwise it may cause fire.