background image

It is important to try and run the dishwasher when it is fully

   loaded to save on energy. In order to prevent odors from form-

  ing and food from caking onto the dishes, you can run the hold

  cycle.

- Choose the right wash cycle: the choice of cycle depends on

  the type of dishware, cookware and utensils being washed and

  how dirty they are.

Energy Saving Tips

- Use the right amount of detergent: if you use too much detergent,

  the result will not be cleaner dishes, but, rather, a greater nega-

  tive impact on the environment.

-There is no advantage in rinsing dishes, cookware and utensils

before placing them in the dishwasher.

How to Keep Your Dishwasher in Shape

After Every Wash

After every wash, turn off the water supply to the appliance and

leave the door slightly ajar so that moisture and odors are not

trapped inside.

Remove the Plug

Before cleaning or performing maintenance, always remove the

plug from the socket.

No Solvents or Abrasive Cleaning Products

To clean the exterior and rubber parts of the dishwasher, do not

use solvents or abrasive cleaning products. Use only a cloth

and warm soapy water.

To remove spots or stains from the surface of the interior, use a

cloth dampened with water and a little white vinegar, or a clean-

ing product made specifically for dishwasher.

When You Go on Holiday

When you go on holiday, it is recommended that you run a wash

cycle with the dishwasher empty and then remove the plug from

the socket, turn off the water supply and leave the door of the

appliance slightly ajar. This will help the seals last longer and pre-

vent odors from forming within the appliance.

Moving the Appliance

If the appliance must be moved, try to keep it in the vertical position.

If absolutely necessary, it can be positioned on its back.

Seals

One of the factors that cause odors to form in the dishwasher is

food that remains trapped in the seals. Periodic cleaning with a

sponge will prevent this from occurring.

Wash Cycle Table

Cycle

Eco

Button

Rapid

Button

Cycle Selection Information

Description of Cycle

Deter-

gent

Rinse

Aid

Intensive

Wash

I n t e n s i v e

Wash

Normal

Wash

Glassware

Glassware

Soak

Very dirty dishes, pots and

pans (not to be used with

delicate items).

Very dirty dishes, pots and

pans. (not to be used with

delicate items)

Normally dirty dishes, pots

and pans. Standard daily

cycle.

Economic, fast cycle to be

used for items which are sen-

sitive to higher. Run immedi-

ately after dishes are used.

Economic, fast cycle to be

used for items which are sen-

sitive to higher. Run immedi-

ately after dishes are used.

Pre-wash of dishes, pots and

pans while waiting for the

load to be completed after

the subsequent meal.

Pre-wash with cold water.
Rinse with cold water.
Extended wash at 60
Rinse with hot water
Drying.

Pre-wash with cold water.
Rinse with hot water
Extended wash at 60
Rinse with hot water
Drying.

Rinse with cold water.

Extended wash at 60

Rinse with hot water

Drying.

Wash at 50

.

Hot Rinse

Drying.

 Wash at 50

 Rinse with cold water.

Short cold wash to prevent

food residue from drying on

the dishes 

30g

30g

15g

15g

Normal Wash

(IEC-EN50242)

25g

Normally dirty dishes, pots

and pans. Standard daily

cycle.

Rinse with hot water.

Extended wash at 60

Rinse with hot water

Drying.

Rinse

For dishes that need to be

rinsed and dried only.

Rinse with hot water

Drying.

Pots&Pas

Button

Intensive

Wash

Very dirty dishes, pots and

pans. (not to be used with

delicate items)

Pre-wash with cold water.
Rinse with cold water
Extended wash at 50
Rinse with hot water
Drying.

30g

Normal

Wash

Normally dirty dishes, pots

and pans. Standard daily

cycle.

25g

Rinse with cold water.

Extended wash at 50

Rinse with hot water

Drying.

25g

.8.

.7.

GB

GB

Summary of Contents for DW12-KFM ME






















Reviews: