Coupler/Filter on each phase entering the house. These filters
will block signals coming into or going out of your house, but
will also match the impedance for the mains. Hereby make
your house
Haibrain
X-10 compatible for these units. The
FD10’s will not only filter but will also couple the phases
(please see 1).
INSTALLATION INSTRUCTIONS FOR
HAIBRAIN
X-10
IN WALL SHUTTER MODULE SW12
INTRODUCTION
This unit allows a motor-
ized blind to be con-
trolled either manually
from a momentary
switch with two nor-
mally open contacts con-
nected to the unit, or
remotely by serial
Haibrain
X-10 Powerline messages sent from a suitable
controller.
When controlled serially the blind can be made to go
to inter-mediate settings in addition to fully up or fully down.
Window parameters, such as Window Size and Current Posi-
tion, together with the unit’s address are set into it by the user
when the unit is put into Install Mode and these are stored in
permanent memory. This data is retained even through a loss of
power.
7
SW12
