Am I able to increase the range of my remotes by using
more Transceivers?
Yes, you can use more than one TM13 Transceiver in your home
when the range of your remotes is not sufficient. The TM13 is
using so called collision detection to prevent signals to be dis-
turbed when more than one TM13 is transmitting. TM13’s will
wait for a quite power line before transmitting their data. To
prevent your
Haibrain
X-10 System to become slow or to pre-
vent dimming from becoming less smooth, make sure that the
TM13 units are placed as far away from each other as possible.
Can I set the SW12 using the Active Home Pro software?
Yes, you can, select SW12 at Appliances. You can partly open
and close the SW12 using percentages. The percentages will
however not fully correspond with the real situation. (It has only
25 positions, so it will always change with a multiple of 4 %)
Do I need to do anything extra if I want to replace my
current switch by a SW12?
Yes, the SW12 can be used in place of any normal switch, but
you have to replace your normal switch with a momentary
switch with two normally open contacts
Does the SW12 respond to the commands ‘All lights on’
and ‘All units off’?
No. The SW12 does not respond to these commands.
The blinds do not open fully when I press the button.
Recalibrate your window height.
What is the maximum programmable time in the SW12?
The maximum time that can be set is 127 seconds.
14
©
HAIBRAIN
