HOW DOES
HAIBRAIN
X-10 WORK?
Haibrain
X-10 components use the existing mains wiring to
communicate (using
Haibrain
X-10 signals). You can build a
complete system using the three different kind of components
of the
Haibrain
X-10 System:
1. Modules:
These components will receive
Haibrain
X-10
signals and will switch or dim the attached lamp or appliance.
Examples of these modules are lamp modules and appliance
modules. These are available as build-in, micro, DIN rail and
plug-in modules.
2. Controllers:
These components will transmit
Haibrain
X-10
signals and thus will control the Modules.
3. Transmitters:
Wireless components like remotes. The signals
of these components will be received by a controller with
transceiver functionality (IRRF 7243, TM13 or CM15Pro). The
Transceiver will translate the signals into
Haibrain
X-10
signals on the power line.
ADRESSES
Up to a maximum of 256 different addresses can be preset.
These are subdivided into a so-called HouseCode (A to P incl.)
and a UnitCode (1 to 16 incl.). The HouseCode can also be set
on the controllers, so that the controllers and modules become
part of the same system. The address can be set either using
code dials or by pressing buttons, depending on the type of
module.
The
Haibrain
X-10 System uses standard commands, which
control all units with the same HouseCode at the same time
(e.g. all lights on, all off, etc.).
4
©
HAIBRAIN
