Hahnel Viper TTL, Instruction Manual

Page: 8 / 40

GB
8
Viper TTL - English
your devices
• A - Turn off both Viper TTL transmitter and receiver
• B - Hold down <Test> button
08
and turn ON
“transmitter”. LED
06
will flash rapidly, release the test
button and LCD
05
will display “coding”
• C - Now hold down receiver <Test> button
15
and
turn ON
12
“receiver”. The LED
11
will flash green
rapidly. Release <Test> button
15
. The LED
06
will
change to red ON all the time confirming DCM is
completed
• D - If you have additional Viper TTL receivers, then
repeat stage “C”. (Viper TTL transmitter must still be in
“coding”)
• If you are using the Viper TTL in combination with the
hähnel Modus 600RT Speedlight, you can still DCM all
devices. Use the same procedure from A to D and then
also DCM match the Modus 600RT as a slave version as
explained in Modus manual
• It is possible to reset the Viper TTL transmitter and
receiver to “open channel”
• Hold down <Test> button 08 and turn ON transmitter
and continue to hold down button 08 for more than 5 sec.
LED 06 will change from rapid flashing to always ON.
Transmitter is now “open channel”
• Now hold down receiver <Test> button 15 and turn ON
receiver and continue to hold down button 15 for more
than 5 sec. LED 11 will change from rapid flashing to
always ON. Receiver is now “open channel”
• If you wish to use old 3rd party Speedlight’s which are not
E-TTL or i-TTL compatible, then set switch 16 to Group
“C” whilst performing the reset of the Receiver to “open
channel”. This allows 3rd party Speedlight’s to be triggered
in Speedlight “M” mode. Check our website www.hahnel.
ie for more info
Multiple Receivers & Flash Guns
• Additional Viper TTL receivers (i.e. Speedlights) can
be triggered wirelessly from the Viper TTL transmitter.
These additional receivers are available as an
accessory
Software Upgrade
• The micro USB socket
09
and
13
can be used to
update the Viper TTL firmware if necessary. Go to
our website www.hahnel.ie for information on how to
download and update the firmware