Hahnel Viper TTL, Instruction Manual

Page: 4 / 40

GB
4
Viper TTL - English
A B C A B C
A B C
Speedlight
• Attach Speedlight to <hot shoe>
10
of the Viper TTL
receiver. Using the slide switch
16
select one of the
group A, B or C for this receiver. Turn on
12
the Viper
TTL receiver which will give a green flashing light
11
to indicate power is on. Turn on the Speedlight. Press
<Test> button
15
on receiver to confirm Speedlight is
working
• Using the cable socket
14
a studio light can be
connected to the Viper TTL receiver via a “Hähnel
Studio Light Cable” which is available as a separate
accessory
• Unlimited numbers of Speedlights / studio lights with
Viper TTL receivers can be allocated to one or different
groups
• For “Nikon” version, set the Nikon Speedlight to <i-TTL>
mode
Camera
• Mount the Viper TTL transmitter onto the hot-shoe of
the camera and lock it into place. Turn on the Viper
TTL transmitter and the camera. Press <Test>
08
button on transmitter to confirm Speedlight is triggered
• Press buttons
A
or
B
or
C
to change the MODE
setting of each group to <M> manual, <TTL> TTL or
<blank> OFF
• Take a test photograph now and the Viper TTL
transmitter will send a wireless signal to each
Speedlight connected to a Viper TTL receiver and to
each Modus 600RT. The Speedlights will be set to
the mode selected for each group on the Viper TTL
transmitter
The Viper TTL LCD
5
will show the setting of each group
• A group is turned OFF if the LCD is not showing the group
• A group is in Manual mode when
<M>
is displayed next
to the group
• A group is in
TTL
mode when
<TTL>
is displayed next to
the group
Each group
A
or
B
or
C
is set independently and it is
possible to use simultaneously different setting for each group
(e.g. Group
A
may be in
<M>
, Group
B
in
<TTL>
and
Group C turned OFF)