Models 7180 and 7380
Owner’s Manual
and Installation Guide
5/22/2019
19
Customer Settings—ST, Cont.
Step 2
Set Regeneration Time
Display reads “Regeneration Time” followed by the current regeneration time that is set (Ex.
02:00am).
To Change the Regeneration Time
A.
Enter the desired regeneration time (hh:mm).
B.
Tap “AP” for AM or PM.
C.
When the desired regeneration time is displayed, press Ok.
Step 3
Set Regeneration Days
Mode 1 - Days Of Week only (see
Operating Modes
).
Step 4
Set Silent Mode Start Time
Display reads “Quiet Start Time” followed by the current time that is set (Ex. 12:00am).
Use silent mode
to prevent audible alarms during specified hours.
To Set the Silent Mode Start Time
A.
Enter the desired silent mode start time (hh:mm).
B.
Tap “AP” for AM
or PM.
C.
When the desired time is displayed, press Ok.
Step 5
Set Silent Mode Stop Time
Display reads “Quiet Stop Time” followed by the current time that is set (Ex. 06:30am).
To Set the Silent Mode Stop Time
A.
Enter the desired silent mode stop time (hh:mm).
B.
Tap
“AP” for AM or PM.
C.
When the desired time is displayed, press Ok.
Step 6
Set Number of People
Display reads “# People” followed by the current setting for the number of people in the household
(Ex. 4).
To Change the Number of People
A.
Enter the number of people in the household.
B.
When the desired number of people is displayed, press Ok.
Note:
Whenever you experience an electrical outage, check your controller for the correct time and day. Make any
necessary corrections.