background image

 

 

Model 410

 

Owner’s Manual 

6/24/2014 

10 Year Limited Warranty 

To Whom Warranty Is Extended 

This warranty is issued to the original owner at the original 
location site and is not transferable to other sites or to 

subsequent owners of the system.  

TO PLACE THE EQUIPMENT UNDER WARRANTY, THE 
WARRANTY REGISTRATION CARD MUST BE COMPLETED 

AND RETURNED BY THE ORIGINAL OWNER TO 

Hague 

Quality Water International 

WITHIN 30 DAYS OF 

INSTALLATION. 

Coverage 

This limited warranty covers the 

Hague Quality Water 

International 

system delivered to the original owner at the 

original location when the system is purchased for personal, 
family, or household use. It is intended to cover defects 

occurring in workmanship or materials or both.  

Warrantor’s Performance and Length of Limited Warranty  
Hague Quality Water International

 warrants that upon receipt 

from the original owner of any mechanical or electronic part 
which is found to be defective in materials or workmanship, 

Hague Quality Water International 

will repair or replace the 

defective item for 3 years from date of original installation. 
Media is not warranted. 

Hague Quality Water International 

further warrants that upon 

receipt from the original owner of any 

Hague Quality Water 

International 

media tank/valve body, brine cabinet, found to be 

defective in material or workmanship, 

Hague Quality Water 

International 

will repair or replace the defective item for 10 

years from date of original installation.  

All defective parts must be returned, along with the equipment 
serial number and date of original installation, to 

Hague Quality 

Water International 

PREPAID, and replacement parts will be 

returned by 

Hague Quality Water International 

to the original 

owner FREIGHT COLLECT. 

Further Exclusions and Limitations on Warranty  

THERE ARE NO WARRANTIES OTHER THAN THOSE 
DESCRIBED IN THIS WARRANTY INSTRUMENT. 

This warranty does not cover any service call or labor costs 

incurred with respect to the removal and replacement of any 
defective part or parts. 

Hague Quality Water International 

will 

not be liable for, nor will it pay service call or labor charges 

incurred or expended with respect to this warranty. 

In the event the water supply being processed through this 
product contains sand, bacterial iron, algae, sulphur, tannins, 

organic matter, or other unusual substances, then, unless the 
system is represented as being capable of handling these 

substances in the system specifications, other special treatment 
of the water supply must be used to remove these substances 
before they enter this product. Otherwise, 

Hague Quality Water 

International 

shall have no obligations under this warranty. 

This warranty does not cover damage to a part or parts of the 
system from causes such as fire, accidents, freezing, or 
unreasonable use, abuse, or neglect by the owner. 

This warranty does not cover damage to a part or parts of the 
system resulting from improper installation. All plumbing and 
electrical connections should be made in accordance with all 
local codes and the installation instructions provided with the 

system. The warranty does not cover damage resulting from use 
with inadequate or defective plumbing; inadequate or defective 

water supply or pressure; inadequate or defective house wiring; 
improper voltage, electrical service, or electrical connections; or 
violation of applicable building, plumbing, or electrical codes, 

laws, ordinances, or regulations. 

THIS WARRANTY DOES NOT COVER INCIDENTAL, 

CONSEQUENTIAL, OR SECONDARY DAMAGES.  
ANY IMPLIED WARRANTIES ON THE PRODUCT 

DESCRIBED IN THIS WARRANTY WILL NOT BE EFFECTIVE 

AFTER THE EXPIRATION OF THIS WARRANTY.  

No dealer, agent, representative or other person is authorized to 
extend or expand this limited warranty. 

Some states do not allow limitations on how long an implied 
warranty lasts or the exclusion or limitation of incidental or 

consequential damages, so the above limitations and exclusion 
may not apply to you. This warranty gives you specific legal 
rights and you may also have other rights which vary from state 

to state. 

Claims Procedures 

Any defects covered by this warranty should be promptly 
reported to: 

Hague Quality Water International

 

4343 South Hamilton Road 
Groveport, Ohio 43125 

When writing about the defects, please provide the original 
owner’s name, telephone number, and original address, serial 
number and model number of the product, and date of 
purchase. (This information should be listed in General 

Information at the front of this manual.) 

Hague Quality Water 

International 

reserves the right to replace defective parts with 

exact duplicates or their equivalent. 

 

Summary of Contents for Maximizer 410





































Reviews: